Temporary Power & Lighting

Portable LED Light Tower 00

Portable LED Light Tower

Portable LED Light Tower

00

The Beacon LED Tower, using the latest in high-efficiency LED lights from Lind Equipment, can be operated on a small user-supplied ‘suitcase’ type generator, and still have plenty of power left over for other uses. With its built in additional fuel tank, the Beacon LED Tower can run for up to 45 hours before refueling. Whether operated from a small generator, or linked in to external sources of...

Industrial Cord Set 00

Industrial Cord Set

Industrial Cord Set

00

This cord manufactured by Ericson includes a Perma-Tight L6-20 plug in connector which makes it ideal for outdoor use in wet areas. Perfect for pumps. Industrial Cord Set with L6-20 Plug in Connector Item # Length E2312PW6P123B 50' E2312PW6P123D...

4′ SmartMonitor Diagnostic Safety Cord 00

4′ SmartMonitor Diagnostic Safety Cord

4′ SmartMonitor Diagnostic Safety Cord

00

4′ long cord with SmartMonitor™ Plugs & Connector. Constantly monitor these conditions: No ground Loss of ground in cord Hot/Neutral swap Reverse polarity Hot on ground Open neutral The SmartMonitor Plug monitors the power source, while the SmartMonitor connector monitors cordset after the plug. LED’s light up Blue (Okay) or Red (Do Not Use) to let you know the status. ** This...

In-Line Pow-R-Block GFCI 00

In-Line Pow-R-Block GFCI

In-Line Pow-R-Block GFCI

00

Permanently molded triple outlet Pow-R-Block with in-line GFCI unit. Unit has both reset and manual test buttons. For indoor or outdoor use, SJTW wire type.

Heavy Duty 1000W Halogen Work Light 00

Heavy Duty 1000W Halogen Work Light

Heavy Duty 1000W Halogen Work Light

00

cUL Certified 1000W Halogen Work Light Telescoping pole extends to 5′ Heavy duty metal housing On/Off switch for each light (2) 500W Bulbs included Detachable base Item# U46103

Temp-Flex POWER-ON Vinyl Cord Sets 00

Temp-Flex POWER-ON Vinyl Cord Sets

Temp-Flex POWER-ON Vinyl Cord Sets

00

Temp-Flex -35 was developed to meet the demands of contractors for a super flexible vinyl cord set. Specially formulated SJTW vinyl outer jacket won’t crack or break, even at temperatures as low as -35°F. Highly visible yellow colour for safety. POWER-ON ollumimated plug to indicate when power is on. Available in #12/3 and #10/3. US Wire POWER-ON Temp-Flex Vinyl Cord Sets Item# Length...

LEX Cam-Type Bare End Tie-In Sets 00

LEX Cam-Type Bare End Tie-In Sets

LEX Cam-Type Bare End Tie-In Sets

00

Bare End Tie-In Sets Item Rating Male Connector Cable Female Connector TS60WF-XX 400 Amp; 600V Bare Cable End 4/0 AWG Type W (5) 16 Series Inline TS50WF-XX 200 Amp; 600V Bare Cable End 2/0 AWG Type W (5) 16 Series Inline Tie-in sets are to be used by authorized personnel only XX to specify cable...

LEX Cam-Type Extensions 00

LEX Cam-Type Extensions

LEX Cam-Type Extensions

00

Cam-type extensions are made with Single Pole Cam-type connectors and Type W (Industrial) feeder cable. Add suffix to indicate connector colour (A) Black, (B) White, (C) Red, (D) Blue, (E) Green Item Rating Male Connector Cable Female Connector LEX-FE600W-XX 400 Amp; 600V 16 Series Inline 4/0 AWG Type W 16 Series Inline LEX-FE500W-XX 200 Amp; 600V 16 Series Inline 2/0 AWG Type W 16 Series Inline...

LEX 400 Amp Type W Feeder Cables with Cam-Type Connectors 00

LEX 400 Amp Type W Feeder Cables with Cam-Type Connectors

LEX 400 Amp Type W Feeder Cables with Cam-Type Connectors

00

With applications in disaster relief, industrial generators, temporary power for construction, sports/entertainment events, etc. Features: Extra hard usage double layer thermoset jacket Available in eight colours: black, red, blue, green, yellow, orange, gray and brown Provides superior durability over thermoplastic PPE Long cable life Heat & flame resistant Colour coding for easy phase...

LEX 30 Amp 3 Phase Bento Box® with Tail Input 00

LEX 30 Amp 3 Phase Bento Box® with Tail Input

LEX 30 Amp 3 Phase Bento Box® with Tail Input

00

Fed from 30 Amp power, this box provides 20A duplex receptacles for lights, audio equipment and tools for a wide range of applications. Features: Hydraulic magnetic breakers help prevent nuisance tripping at higher temperatures Stackable and compact for easy storage Heavy duty extruded engineered thermoplastic enclosure is electrically insulated and resistant to shock, impact and corrosion...

LEX 50 Amp Terrapin Station™ 00

LEX 50 Amp Terrapin Station™

LEX 50 Amp Terrapin Station™

00

The PowerHOUSE™  Terrapin Station power distribution box delivers power from electrical panels or portable generators and is ideal for power tools, portable lights, chargers and other equipment. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers located under a heavy duty rubber, waterproof, self-closing lid for enhanced...

LEX 50 Amp Pagoda Jr. to Duplex Receptacles, Feed Thru 00

LEX 50 Amp Pagoda Jr. to Duplex Receptacles, Feed Thru

LEX 50 Amp Pagoda Jr. to Duplex Receptacles, Feed Thru

00

This box provides a large number of 20 Amp Edison receptacles for use in industrial maintenance and temporary structures to power lights, fans, pumps, tools and computers. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers mounted under hinged window for easy access and enhanced protection Stackable and compact for easy...

LEX 100 Amp 3 Phase Pagoda to L21-20 Locking Receptacles 00

LEX 100 Amp 3 Phase Pagoda to L21-20 Locking Receptacles

LEX 100 Amp 3 Phase Pagoda to L21-20 Locking Receptacles

00

Provides 20Amp locking receptacles to distribute power to smaller power distribution units. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers mounted under hinged window for easy access and enhanced protection Stackable and compact for easy storage and convenient portability Elevated base keeps receptacles above ground...

LEX 200A 3Phase Hex with Tail Input 00

LEX 200A 3Phase Hex with Tail Input

LEX 200A 3Phase Hex with Tail Input

00

Distributes power directly from a generator or panel to 50 Amp California-style locking receptacles to smaller power distribution units such as construction boxes or temporary power boxes. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers mounted under hinged window for easy access and enhanced protection Stackable and...

LEX 200A 3Phase Power Station to GFCI Duplex Receptacles 00

LEX 200A 3Phase Power Station to GFCI Duplex Receptacles

LEX 200A 3Phase Power Station to GFCI Duplex Receptacles

00

This box can be fed directly from a generator or from a larger box and is used where many 20A GFCI protected duplex receptacles are needed. Applications include powering multiple lights, appliances, computer and audiovisual systems. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers mounted under hinged window for easy...

LEX 200 Amp 3 Phase Hammerhead to Locking Receptacles 00

LEX 200 Amp 3 Phase Hammerhead to Locking Receptacles

LEX 200 Amp 3 Phase Hammerhead to Locking Receptacles

00

This box separates 200 Amp, 3 Phase circuits into (10) L21-20  20A locking receptacles. The locking mechanism helps prevent arcing and disconnecting while under load. The 20 Amp circuits are used to power fans, pumps, lights, etc. Features: Heavy-duty molded rubber enclosure is fully insulated and resistant to shock, impact and corrosion Circuit breakers mounted under hinged window for easy...